Description
FREE CUSTOM CUT TO SIZE. We will cut your stair nosing to the lengths you require at no extra cost!
It's recommended for general indoor & outdoor environments. Can be installed in places with low - high traffic areas. This stair nosing can be installed with glue onto a variety of substrates including Timber, Concrete, Bitumen, Tiles, Vinyl, Rubber and Carpet.
Specifications:
| SKUS: |
no holes drilled: SAS7530ALUM with holes drilled: SAS7530ALUM-HOLES |
| Material: | Aluminium with Aluminium Insert |
| Colour: | Black Aluminium w/ Black Aluminium Insert |
| Width: |
75mm (Aluminium) 50mm (Insert) |
| Nose/Face: | 30mm |
| Slip Rating: | P5/R13 |
| Compliance: |
AS/NZS 1428.1 – 2021 |
| Lead time: | 5 - 15 business days from time of order |
|
MAX. Length PER PIECE
|
VIC & QLD: 3.6 Metres (3600mm)
All Other States: 2.6 metres (2600mm) due to shipping restrictions |
|
Mounting |
Surface mount fix only |
| NOTE: | Please put TOTAL Length required
eg. 80 Metres in QTY Box (AFTER ROUNDING UP) |
Please note with this particular product we only offer option without holes drilled. We suggest using Selleys Hold Up adhesive for installing the Stair Nosing.
Manufactured to AS/NZS 1428.1 – 2021
Ordering Information and Instructions
We measure our stair nosing in lineal metres. Measurements are required in millimetres (mm) as a lineal metre is 1000mm (1metre).
It is important that we get your stair nosing order right so that your stairs are compliant and looking their best. For this reason, please read the following information carefully.
Our price is per lineal metre (1000mm)
This stair nosing has an insert which will come separately and is easy to apply to your stair nosing with the double-sided tape attached. We leave it up to you to apply because some customers need to drill their own holes in allocated spaces that are only able to be determined once onsite.
How to work out what you need to order:
Add your quantity of stair nosing individual lengths required (in mm) and total them up. This is the total amount of lineal metres that you require. Round up the measurements to the next lineal metre. (See Rounding Up Rule below) This is what you will be charged for.
For example: I have 10 stairs that I want to install stair nosing on. Each step is 850mm long.
850mm x 10 =8500mm = 8.5 lineal metres
As the stair nosing is sold per lineal metre I will be charged for 9 lineal metres as it is rounded up to the next metre.
Rounding Up Rule
If my total was between 8.1 and 8.4 lineal metres, the amount I would be charged for would be rounded up to 9 metres but I would still receive 8.4 metres. Anything totalling between 8.5 and 9.0 metres is charged at 9 lineal metres.
This is the rounding up rule.
The staff at Safety Xpress are amazing but they are not mind readers, so I will need to tell them that I want my stair nosing pieces to be cut 850mm long to fit each of my stairs.
I will need to do this in the comments box that appears when I finalise my order with my payment. If I fail to do this the Safety Xpress team will have to contact me and this will hold up my order from production and dispatch to me.
Please Note: The longest lengths we can supply is 3.6 metres (3600mm) in Victoria and QLD, and 2.6 metres (2600mm) in all other States due to shipping restrictions.
We are very happy to answer technical questions about our stair nosing, as there are plenty of varieties to choose from and we always welcome your call. We do require your measurements in writing to make sure that no details get lost in translation and that you are happy with your end result.
You have 3 options for getting your details to us. 1. Email your requirements to sales@safetyxpress.com.au or, 2. Through the Contact Us form on this website. 3. Alternatively you can begin your order on this page, include your specifications in the comments box where you make your payment and we will dispatch your order Xpress. Too easy!
Custom ordered products including stair nosing cannot be returned due to change of mind.
Which Stair Nosing Should I Choose?
Warranty Information
Manufacturer's Warranty
We are proud to offer a standard 12 month manufacturers warranty covering all products sold by Safety Xpress (unless otherwise stated).
For some products we offer 2 years, 5 years and up to 10 years warranty. (please refer to specific product page)
This warranty verifies that our products meet the highest standards for domestic and commercial use. This limited warranty gives you specific legal rights. You may also have other rights which vary from state to state.
A. Who does this warranty cover?
Anyone who has purchased goods directly from Safety Xpress is covered under this warranty. Please retain a copy of your order confirmation as proof of purchase. You will require this in order to make a warranty claim, without this proof of purchase we reserve the right to reject any claim under this warranty. Please also note that the warranty is for the benefit of the original purchaser only and is not transferable upon any resale.
B. What does the warranty cover?
This warranty covers defects in the fundamental manufacturing workmanship and/or materials of any Safety Xpress product that has, at all times, only been utilised for its intended purpose and is installed in accordance with our product installation guides.
C. What does the warranty NOT cover?
This warranty does not cover flaws that have been incurred due to mis-use, sub-standard installation or failure-to-follow care instructions. Similarly, the below are also excluded under the manufacturers warranty :
- Item preference and/or change of mind.
- Abnormal use.
- Physical abuse or damage to the products which causes defects.
- Exposure to extreme temperatures for a period of time that causes the materials to wear or permanently deform.
- Any claim made other than for the benefit of the original purchaser.
- Any fault that can be attributed to installation IF the installation was completed by persons outside of the ‘The Trustee for Safety Xpress Unit Trust’.
D. When does the warranty start?
The warranty starts on the date of delivery of the items and lasts until the end of 12 months from that date.
E. Your Responsibilities
To make a claim under this Warranty, please send: 1) a brief written description and photo of the problem or condition that you believe constitutes a defect; 2) proof of purchase (such as your order number or an original dated sales receipt) to Safety Xpress at sales@safetyxpress.com.au
We reserve the right, in our sole discretion, to require photographs, further information or descriptions, or to physically inspect the items prior to accepting a particular claim under this Warranty.
Return of the faulty item is the purchasers responsibility whether that be financial cost of delivery or personal physical delivery of items to the nearest Safety Xpress location.
F. What do we do when we get all this from you?
Any evidence we receive regarding the potential warranty claim, including the product itself (in some cases), will be examined and evaluated by Safety Xpress. When we have received the evidence, we will decide at our sole, reasonable discretion whether your claim is covered by the warranty or not. If we determine that it is covered, we will repair or replace (as applicable) and ship your complete items back to you. Safety Xpress reserves the right to offer you a similar like-for-like replacement, should your item be of discontinued status. Safety Xpress will cover the shipping expenses of the first warranty claim. The warranty period does not restart, but rather continues from your original purchase date.
G. What if I only want a refund?
This warranty does not automatically give you the right to a refund. The warranty only covers replacements, repairs and upgrades for successful warranty claims. Should the item not be suitable for repair / replacement or upgrade, a refund or compensation may be offered in lieu at the discretion of Safety Xpress.
H. Warrantor
The Trustee for Safety Xpress Unit Trust sales@safetyxpress.com.au
