FREE CUSTOM CUT TO SIZE. We will cut your stair nosing to the lengths you require at no extra cost!
The TAS7510 Tough Anti Slip Stair Nosing has a 10mm Bull Nose face with a 3mm heavy duty Yellow carborundum hard insert and is recommended for indoor & outdoor environments and designed for use in high traffic traffic areas. This stair nosing can be installed with glue or fixed in place using screws onto a variety of substrates including Timber, Concrete, Bitumen, Tiles, Vinyl, Rubber and Carpet. We can supply with or without countersunk holes and screws depending on the required application. The Safety Xpress Tough Anti Slip 10mm bull nose (TAS7510) is Australian compliant meeting the national building code standards - AS/NZS 1428.1 - 2009 when installed according to the standard.
||Aluminium w/ Hard Carborundum Insert
||Silver Aluminium w/ Yellow Insert
||AS/NZS 1428.1 - 2009
||3-5 Business Days from time of order
MAX. Length PER PIECE
(Due to Shipping Restrictions):
|VIC & QLD: 3.6 Metres (3600mm)
All Other States: 2.6 metres (2600mm)
||Please put TOTAL Length required
eg. 80 Metres in QTY Box (AFTER ROUNDING UP)
Ordering Information and Instructions
It is important that we get your stair nosing order right so that your stairs are compliant and looking their best. For this reason, please read the following information carefully.
Our default price is per lineal metre (1000mm) without countersunk holes and screws. Add another $1.50 + gst per lineal metre (1000mm) to have countersunk holes and screws included in your order. You will notice the tick box above price will automatically change if you choose this option.
How to work out what you need to order:
Measure and add all individual lengths required (in mm) and sum them up in mm. This is the total amount of lineal metres that you require. Round UP the measurements to the next lineal metre. (See Rounding Up Rule below) This is what you will be charged for.
For example: I have 10 stairs that I want to install stair nosing on. Each step is 850mm long.
850mm x 10 =8500mm = 8.5 lineal metres
As the stair nosing is sold per lineal metre I will be charged for 9 lineal metres as it is ALWAYS ROUNDED UP to the next metre.
Rounding Up Rule
Once you have the total measurement you require then round up to the next meter. This is the quantity you will need to enter in the quantity field.
If my total was between 8.1 and 8.4 lineal metres, the amount I would be charged for would be rounded up to 9 metres but I would still receive 8.4 metres. I will need to enter 9 Meters in the Quantity Box
If my total was between 8.5 and 9.0 metres, the amount I would be charged for would still be rounded up to 9 metres but I would still receive 8.4 metres. I will need to enter 9 Meters in the Quantity Box
This is the rounding up rule.
Countersunk Holes and Screws Options:
We leave it up to you to pick supply with OR without countersunk holes because some customers need to drill their own holes in allocated spaces that are only able to be determined once onsite, or some customers simply want to glue the stair nosing down which wouldn't require any holes drilled.
We drill countersunk holes for you and supply screws:
If you pick the option of us drilling holes for you, we will also supply you screws. However if you do pick this option, you will need to install the aluminium stair nosing first, fix it in place using screws, then peel off and stick down the anti-slip insert - so that the anti-slip insert will cover the fixings holes, and you end up with a nice finish. Please note this option means you will receive the aluminium stair nosing and the ant-slip insert as separate pieces.
No holes drilled no fixings supplied
You will receive the product as one piece: aluminium strips cut to length, with no holes drills, and the anti-slip inserts also cut to length already stuck down onto aluminium. We suggest using Selleys Hold Up adhesive to fix stair nosings to stairs if you decide to go with this option.
Note: If you choose this option and want us to supply you the insert and aluminium stair nosing separately, you must indicate this in your order.
The staff at Safety Xpress are amazing but they are not mind readers, so I will need to tell them that I want my stair nosing pieces to be cut 850mm long to fit each of my stairs.
I will need to do this in the comments box that appears when I finalise my order with my payment. If I fail to do this the Safety Xpress team will have to contact me and this will hold up my order from production and dispatch to me.
Lead time on stair nosing is generally 3-5 business days. Special order stair nosing is 4-5 business days. (This includes some stair nosing with inserts and our FRP stair nosing)
Please Note: The longest lengths we can supply is 3.6 metres (3600mm) in Victoria and QLD, and 2.6 metres (2600mm) in all other States due to shipping restrictions.
We are very happy to answer technical questions about our stair nosing, as there are plenty of varieties to choose from and we always welcome your call. We do require your measurements in writing to make sure that no details get lost in translation and that you are happy with your end result.
You have 3 options for getting your details to us. 1. Email your requirements to email@example.com or, 2. Through the Contact Us form on this website. 3. Alternatively you can begin your order on this page, include your specifications in the comments box where you make your payment and we will dispatch your order Xpress. Too easy!
Custom ordered products including stair nosing cannot be returned due to change of mind.
Which Stair Nosing Should I Choose?